Clean saddle, handlebars, step pad and flywheel with a cloth and cleaner after use. Do not use bleach or coarse abrasives.
Every 250 Hours of Use
- Check all six fasteners on the crank arms and pedals for tightness using the 6mm L-key supplied with the BikeErg, or a standard 15mm pedal wrench.
- Check all assembly fasteners for tightness.
- Check for dust inside flywheel with a flashlight. Vacuum if needed. Confirm calibration after cleaning. On the PM: Main Menu>More Options>Utilities>Calibration Utilities
Check the fit of the seat post. The seat post should move up and down with only light pressure applied. The seat post can be adjusted using a 1⁄2” wrench. Do not overtighten.